ITech IT6000C Series User Manual page 23

The description of the menu items is shown in the table below.
Beep Set the beeper state.
On
Off
Set the power-on state.
PowerOn
Reset
Last
Last+Off
Sense Set the sense function state.
Off
On
ListTrig Source Set the trigger method for the List files running.
Manual
Bus
External
DLogTrig Source Set the trigger method for the data logging.
Manual
Bus
External
I/O Set the communication information between instrument and PC.
USB
You can press [Esc] to return to the previous menu.
Turn the beeper on.
Turn the beeper off.
When the instrument is powered on, the instrument will in-
itialize some settings and [On/Off] state.
When the instrument is powered on, the instrument will re-
main the same settings and [On/Off] state as last time
you turned off the instrument.
When the instrument is powered on, the instrument will re-
main the same settings as last time you turned off the in-
strument, but the [On/Off] is OFF state.
Turn the sense function off.
Turn the sense function on.
Manual trigger
Bus trigger
External trigger
Manual trigger
Bus trigger
External trigger
USB communication interface
USB-TMC protocol
TMC
Virtual serial port
VCP
Display as the following format:
baud rate_data bit_parity bit_stop bit.
•
•
Copyright © Itech Electronic Co., Ltd.
Select the baud rate from the following
options: 4800, 9600, 19200, 38400,
57600, 115200
Select the data bit from the following op-
tions: 5, 6, 7, 8
Quick Reference
12