Shipping And Storage Conditions; Mechanical And Climatic Environmental Conditions - Siemens SIMATIC ET 200SP System Manual

Name
A = BVT AD 24
B = DCO RK D 5 24
C = DEHNconnect DCO RK E 60
14.4

Shipping and storage conditions

Introduction
The ET 200SP distributed I/O system exceeds requirements in terms of shipping and
storage conditions according to IEC 61131-2. The following information applies to modules
that are shipped and/or stored in their original packaging.
Table 14- 7
Type of condition
Free fall (in shipping package)
Temperature
Barometric pressure
Relative humidity
Sinusoidal oscillations according to
IEC 60068-2-6
Impact according to IEC 60068-2-27
14.5

Mechanical and climatic environmental conditions

Operating conditions
The ET 200SP distributed I/O system is suitable for use in weather-proof, fixed locations.
The operating conditions exceed requirements according to DIN IEC 60721-3-3:
● Class 3M3 (mechanical requirements)
● Class 3K3 (climatic requirements)
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Shipping and storage conditions for modules
14.4 Shipping and storage conditions
Part number of Dehn Co.
918 402
919 986
919 990
Permissible range
≤1 m
From -40 °C to +70 °C
1080 hPa to 660 hPa (corresponds with an altitude
of -1000 m to 3500 m)
5% to 95%, without condensation
5 - 8.4 Hz: 3.5 mm
8.4 - 500 Hz: 9.8 m/s
250 m/s , 6 ms, 1000 shocks
2
Technical specifications
2
239