Siemens SIMATIC ET 200SP System Manual page 171

Commissioning procedure
To commission the ET 200SP distributed I/O system CPU as an IO controller for
PROFINET IO, we recommend the following procedure:
Table 10- 1
Step
1
2
3
4
5
6
7
8
9
10
The IO devices are configured with the IO controller.
1
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Procedure for commissioning the ET 200SP CPU as an IO controller for PROFINET IO
Procedure
Installing ET 200SP
Connecting ET 200SP
Supply voltages
•
PROFINET IO
•
Sensors and actuators
•
Inserting a SIMATIC memory card in the IO
controller
Configuring the IO controller
Switching on supply voltages for the IO
controller
Switching on supply voltages for IO devices
Downloading the configuration to the IO
controller
Switching IO controller to RUN mode
Checking LEDs
Testing inputs and outputs
10.2 Commissioning the ET 200SP for PROFINET IO
See ...
Section Installation (Page 39)
Section Wiring (Page 49)
Section Removing/inserting a SIMATIC
memory card on the CPU (Page 180)
Section Configuring (Page 97)
1
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) manual
Documentation of the IO device
STEP 7 online help
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) manual
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) manual
The following functions are helpful: Mon-
itoring and modifying tags, testing with
program status, forcing, controlling the
outputs. See section Test functions and
eliminating problems (Page 224)
Commissioning
171