Siemens SIMATIC ET 200SP System Manual page 18

System overview
2.3 How are SIMATIC Safety F-systems structured with ET 200SP?
Example of a configuration with fail-safe I/O modules
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Figure 2-4
Hardware and software requirements
ET 200SP fail-safe modules are supported by IM155-6PN ST interface modules as of
firmware V1.1.1, IM155-6PN HF as of firmware V2.0 and IM155-6DP HF as of firmware
V1.0.
You need the STEP 7 Safety Advanced option package V12 including HSP 54 or higher to
configure and program the ET 200SP fail-safe modules with the SIMATIC Safety F-system.
You need the F-Configuration Pack V5.5 SP10 to configure and program the ET 200SP fail-
safe modules with the Distributed Safety F-system.
You need the F-Configuration Pack V5.5 SP12 to configure and program the ET 200SP fail-
safe modules with the Distributed Safety F/FH system.
18
Interface module
Light-colored BaseUnitBU..D with infeed of supply voltage
Dark-colored BaseUnitsBU..B for conducting the potential group further
I/O module
Server module (ships with the interface module)
Fail-safe I/O modules
BusAdapter
Mounting rail
Reference identification label
Example of a configuration of the ET 200SP with fail-safe I/O modules
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF