Siemens SIMATIC ET 200SP System Manual page 198

SIMATIC memory card
11.1 SIMATIC memory card - overview
Folders and files on the SIMATIC memory card
The following folders and files can be found on the SIMATIC memory card:
Table 11- 1
Folder
FWUPDATE.S7S
SIMATIC.S7S
SIMATIC.HMI
DataLogs
Recipes
Table 11- 2
File type
S7_JOB.S7S
SIMATIC.HMI\Backup\*.psb
SIMATICHMI_Backups_DMS.
bin
__LOG__
crdinfo.bin
DUMP.S7S
*.pdf, *.txt, *.csv, etc.
Use the serial number for copy protection
You can set up copy protection for CPUs which binds execution of the block to a specific
SIMATIC memory card. Configuration is carried out in STEP 7 in the properties of the block
"Bind to serial number of the SIMATIC memory card".
The user can then only execute the block if it is on the SIMATIC memory card with the
specified serial number.
198
Folder structure
Description
Firmware update files for CPU and I/O modules
User program, i.e. all blocks (OBs, FCs, FBs, DBs) and system
blocks, project data of the CPU
HMI-relevant data
DataLog files
Recipe files
File structure
Description
Job file
Panel backup files
Protected file (required to use panel backup files in STEP 7)
Protected system file (required in order to use the card)
Protected system file (required in order to use the card)
Service data file
Additional files with different formats that you can also store in folders
of the SIMATIC memory card
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF