Siemens SIMATIC ET 200SP System Manual page 98

Configuring
6.1 Configuring ET 200SP
Requirements for configuration of the CPU
Table 6- 1 Requirement for installing the CPU
Configuration software
CPU 151xSP-1 PN:
STEP 7 (TIA Portal) as of
V13 Update 3
CPU 151xSP F-1 PN:
STEP 7 (TIA Portal) as of
V13 SP1
CPU 151xSP-1PN (as of FW
version V1.8), CPU 151xSP
F-1 PN (as of FW version
V1.8):
STEP 7 (TIA Portal) as of
V13 SP1 Update 4
Requirements for configuration of the interface module
Table 6- 2 Requirement for installing the interface module
Configuration software
STEP 7 (TIA Portal) as of
V11 SP2*
STEP 7 as of V5.5 SP2
Software of third-party manu-
facturer
* The TIA Portal supports GSDML specification V2.25. The ET 200SP distributed I/O system is delivered with a GSD file
based on specification V2.3. The GSD file can be installed in the TIA Portal and used without restrictions.
98
Requirements
PROFINET IO
•
PROFIBUS DP (optional): with the communication
•
module CM DP
Requirements
PROFINET IO: as of Support Package HSP0024
•
PROFINET IO: GSD file GSDML-Vx.y-siemens-
•
et200sp-"Date in format yyyymmdd".xml
(http://support.automation.siemens.com/WW/view/e
n/19698639/130000)
PROFIBUS DP: GSD file SI0xxxxx.gsx
•
(http://support.automation.siemens.com/WW/view/e
n/10805317/133300)
Installation information
STEP 7 online help
Installation information
STEP 7 online help
Manufacturer documentation
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF