Control Data Record For An Interface Module - Siemens SIMATIC ET 200SP System Manual

9.2.3

Control data record for an interface module

Slot assignment
The following table shows the possible slots for the various modules for an
ET 200SP interface module:
Table 9- 3 Slot assignment
Modules
Interface module
Station extension
BA-Send
ET 200SP I/O module
Server module
ET 200AL I/O module
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Possible slots
0
1
1 - 12 for IM 155-6 PN BA
1 - 32 for IM 155-6 PN ST,
IM 155-6 DP HF
1 - 64 for IM 155-5 PN HF
1 - 13 for IM 155-6 PN BA
1 - 33 for IM 155-6 PN ST,
IM 155-6 DP HF
1 - 65 for IM 155-5 PN HF
34 - 49 for IM 155-6 DP HF
66 - 81 for IM 155-6 PN ST,
IM 155-6 PN HF
Configuration control (option handling)
9.2 Creating the control data record
Comment
The interface module (slot 0) is not an element of the configu-
ration control, but instead controls this.
For mixed configuration with ET 200AL modules, BA-Send is
always on slot 1.
Downstream from the interface module
The server module completes the configuration of the
ET 200SP station after the last I/O module.
For mixed configuration with ET 200AL modules
151