Siemens SIMATIC ET 200SP System Manual page 25

Accessories of the ET 200SP distributed I/O system
Table 2- 3 Accessories of the ET 200SP
Accessories
24 V DC connector
Shield connection
Labeling strips
Reference identification
labels
Color identification labels
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Function
Applying the 24 V DC supply at the connector
and connection with the IM.
The shield connection allows the low-
impedance contacting of cable shields with
minimum installation times.
Attach the labeling strips to the modules for
system-specific labeling of the ET 200SP. The
labeling strips can be printed.
The labeling strips can be ordered as acces-
sories (Page 245) on a roll for thermal transfer
printers or as DIN A4 format sheets for laser
printers.
The labels enable the reference identification
labeling of the ET 200SP components.
The labels can be ordered on a mat for ther-
mal transfer and inkjet printers as accessories
(Page 245).
The color identification labels are module-
specific and can be ordered for the process
terminals, AUX terminals and additional termi-
nals as accessories (Page 245).
System overview
2.4 Components
Figure
25