Chapter 1- Introduction; Product Overview - Xycom 9450 Manual

Chapter 1 – Introduction

Product Overview

The 9450 Industrial Computer System puts the power and versatility of an IBM
PC/AT™-compatible computer in a package that makes sense for the factory floor and
other harsh environments. The Xycom 9450 Industrial PC/AT Computer System features
an open architecture to meet a variety of applications that require both a powerful PC and
a durable industrial enclosure. The system integrates a computer card cage, mass storage,
display, keypads, and power supply in a truly industrial form factor.
The 9450 system includes a seven-slot passive backplane, an SVGA monitor, hard and
floppy disk drive facilities, and data entry and function keypads. The front panel is sealed
to NEMA 4/NEMA 12 standards, and the CRT is protected with an impact-resistant
Lexan shield. The open-architecture design accepts IBM PC-, XT-, or AT-compatible
cards.
The system comes with a 486, 5x86, or Pentium® computer installed (configuration de-
termined upon order). The processor board combines all the functions of a complete IBM
PC/AT-compatible computer on a single, industrially-hardened circuit board.
The system's "works in a module" design allows easy access to the boards, switches,
power supply and disk drives. The module is easily removed by loosening three thumb
screws and sliding the module out.
The 9450 supports a variety of industrial software packages including the following:
The software list is continually expanding. Consult Xycom for additional listings.
•
SoftScreen PC/AT
•
6200
•
Aimax-Plus
•
CELLworks
•
CITECT
•
Control View*
•
Direct Factory
•
Fix/DMACS
•
Factory Link
•
FloPro
•
Genesis
•
Intouch
•
ModSoft
•
OI-2000
•
Paragon 500*
•
PCIM
•
Screen Ware2
•
Viewpoint
1-1