2.3
Inserting and charging the rechargeable batteries
Figure 4: Battery compartment view of the device (plusoptiX A12C)
Attention:
If you need to put the device on its rear side, e.g. to insert or replace the
rechargeable batteries, please place a soft cloth under the device.
To insert the batteries, please put the device on a level working surface on its rear side.
Attention:
If you insert batteries other than those supplied, you should exclusively use
rechargeable Nickel Metal Hydride NiMH/AA HR6 batteries with a capacity of at
least 1900 mAh and a quick-charge rate of min. 1 A.
Now remove the battery compartment cover using a 1-cent coin, and insert the supplied
rechargeable batteries.
Note:
When inserting rechargeable batteries, please ensure that the contacts are located
on the correct side.
Note:
The type plate with the serial number (S/N 120xS-xxx-xxxx xxxx) is located under
the battery compartment. If you contact us regarding extended service or warranty
questions, please remember to always quote the serial number of your device. The
S/N number helps us to answer your question quickly.
Page 9/68
Battery
compartment
Type plate
Need help?
Do you have a question about the A12C and is the answer not in the manual?