Perform Next Measurement - PLUSOPTIX A12C User Manual

3.6

Perform next measurement

Save or print the measuring results of the last measurement, before you perform the next
measurement.
Attention:
As soon as you press the shutter-release button, you delete the video of the last
measurement as well as the measured values from the working memory (RAM).
The last video can no longer be viewed and measurement results can then no
longer be printed out or saved. Therefore save or print the measurement result, in
case you want to access it later.
Press the shutter release button once to return to the Start screen. You can return directly to
the Start screen from every measurement result page, Settings page or Help Text page.
As soon as you have returned to the Start screen a new measurement is started by pressing
the shutter-release button:
- After a preceding anonymous measurement, a new anonymous measurement is started
(plusoptiX A12C and plusoptiX A12R).
- After a cancelled measurement with patient data (plusoptiX A12C only) the device
"remembers" the patient data of the last patient and the button (1) is preset. This "memory
function" makes it possible to measure the same patient several times in succession,
without having to enter the patient data again every time. By pressing the shutter-release
button the preset patient is measured once again.
This "memory function" can be deactivated by touching the button (1). By pressing the
shutter-release button measurement then takes place anonymously.
- After a successful measurement with patient data (plusoptiX A12C only) the "memory
function" and button (2) are deactivated. By pressing the shutter-release button
measurement takes place anonymously.
- If new patient data are to be entered or called up from the database before the next
measurement (plusoptiX A12C only), in both cases (i.e. after a cancelled or a successful
measurement) this can be done by pressing the button (3).
1) 2)
Page 25/68
3)