PLUSOPTIX A12C Short Manual
Binocular autorefractor.
documenting measurement results electronically
Hide thumbs
Also See for A12C:
- User manual (68 pages) ,
- Short manual (11 pages) ,
- Software upgrade (2 pages)
Related Manuals for PLUSOPTIX A12C
Summary of Contents for PLUSOPTIX A12C
- Page 1 Binocular Autorefractor Short Manual 5 “Documenting measurement results electronically” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 10/18/2018...
-
Page 2: Table Of Contents
Saving measurement reports ..................4 Adding an individual infographic ................. 5 Accessing the measurement reports ................6 Full integration with your EMR system (only A12C and A16) ..........8 List of figures Figure 1: Example of a measurement report (Letter-sized or DinA4) ........4 Figure 2: Manual connection of the storage device to a workplace computer ...... -
Page 3: Documenting The Measurement Results – An Overview
More information about entering or retrieving patient data can be found in supplementary short manual 4. As an alternative to manual entry of the patient data, the plusoptiX A12C and A16 can also be connected for a full integration with your EMR system (see chapter 3 “Full integration with your EMR system (only A12C and A16)”). -
Page 4: Saving Measurement Reports
After confirming the patient data entry or the anonymous, consecutive patient ID (see supplementary short manual 4), a print job for label printing is sent via the infrared interface and a measurement report is saved to the inserted SD card (plusoptiX A12) or USB stick (plusoptiX A16) at the same time. -
Page 5: Adding An Individual Infographic
If the patient data has already been entered or retrieved before the measurement in the plusoptiX A12C or A16 model, the measurement report is automatically saved to a SD card (plusoptiX A12C) or USB stick (plusoptiX A16) as a PDF file at the end of every successful measurement. -
Page 6: Accessing The Measurement Reports
2.3 Accessing the measurement reports After saving the measurement report to the SD card (plusoptiX A12) or USB stick (plusoptiX A16), there are four different options to electronically access them: a) Manual connection of the SD card or USB stick to a workplace computer... -
Page 7: Figure 3: Manual Lan/Wlan Network Access
“plusoptiXconnect” is a freeware programme for automated connection and printing of measurement reports. The plusoptiX A12C (WLAN) or A16 (LAN and WLAN) must be connected to the network via LAN or WLAN, too. The measurement reports stored on the SD card or USB stick can now be portrayed and printed automatically on your workplace computer. -
Page 8: Full Integration With Your Emr System (Only A12C And A16)
3 Full integration with your EMR system (only A12C and A16) As an alternative to manual entry of the patient data, the plusoptiX A12C and A16 can also be connected for a full integration with your EMR system. Data files...
Need help?
Do you have a question about the A12C and is the answer not in the manual?
Questions and answers