Pressure Safety; Temperature Safety; Toxic Materials; Repair And Maintenance - Michell Instruments XTC601 User Manual

Pressure Safety

The XTC601 measurement chamber requires pressurized gas to be connected to it. Observe
pressurized gas handling regulations. Suitably trained personnel only should carry out tasks that
include the use of pressurized gas mediums.
DO NOT permit pressures greater than the safe working pressure to be applied to the instrument.
The specified safe working pressure for this instrument is 3 barg (43 psig) max.

Temperature Safety

During operation some internal parts of the instrument may be at high temperature.

Toxic Materials

The use of hazardous materials in the construction of this instrument has been minimized. During
normal operation it is not possible for the user to come into contact with any hazardous substance
which might be employed in the construction of the instrument. Care should, however, be exercised
during maintenance and the disposal of certain parts.
Long exposure to, or breathing of the calibration gases, may be dangerous.

Repair and Maintenance

The instrument must be maintained either by the manufacturer or an accredited service agent. For
Michell Instruments' worldwide offices contact information go to www.michell.com.

Calibration

The recommended calibration interval for the analyzer is 1 to 3 months.

Safety Conformity

This product carries the CE mark and meets the requirements of relevant European safety directives.
x
This product is used in conjunction with pressurized gases.
Observe pressurized gas handling precautions.
Pressurized gas is dangerous.
Pressurized gas should only handled by suitably trained
XTC601 User's Manual
WARNING:
WARNING:
personnel.
97400 Issue 3.1, January 2017