Phase Page (Hcg Version Only); External Sensor Page; Figure 25 Phase Page; Figure 26 External Sensor Page - Michell Instruments XTC601 User Manual

OPERATION
2.7.7

Phase Page (HCG version only)

This page allows for the user to change the currently measured phase.
The user can also choose between internal phase control (via the screen) or external
control via the 4-20 mA input.
Parameter
CONTROL
PHASE
For details on external control of the phase, please see section 4.5.7.
2.7.8

External Sensor Page

This page sets up the type and range of the 4-20 mA external sensor signal that may
be connected to the XTC601 for viewing in the Main Page. The range is adjustable
between the MIN and MAX values but is not adjustable for
and 100%).
22
CONTROL
PHASE
Figure 25
Description/Operation
Selects how the phase selection
is controlled
Selects the phase
Table 10 Phase parameters
EXT.SENS PV
EXT.SENS MIN
EXT.SENS MAX
UNIT = N/A
Figure 26 External sensor page
XTC601 User's Manual
INTERNAL
H2/AIR
Phase page
Options
or
INTERNAL
H2/AIR, H2/CO2 or CO2/AIR
NONE
N/A
N/A
Other
97400 Issue 3.1, January 2017
(mA Input)
EXT.
setting (fixed at 0%