Power-Up Procedure - Arjohuntleigh RotoProne User Manual

• Manual Rotation to Prone Instructions
• Help
• Hand Control
• Alarms

Power-up Procedure

1. Plug power cord into a properly grounded wall outlet.
2. Press ON / OFF switch located behind power switch door to activate power.
3. The software will boot and a Set Date and Time option will appear on
the main display.
The main display is a touch screen located at the foot of the
RotoProne Unit. It is the primary point of interface for the
caregiver. The caregiver can simply touch the various buttons
shown on the screen to access all RotoProne Unit functions. The
buttons lead to subsequent screens that display therapy and
proning options, settings and configurations.
4. Enter correct date and time if necessary and press either Save New Time or Time is Correct button.
5. A calibration option will appear on the main display. Detailed information regarding the calibration
procedure is outlined in the Patient Placement section of this manual.
Do not calibrate scales. Scale calibration should be performed by trained ArjoHuntleigh personnel.
6. Once calibration is completed, a Notice to Users screen will appear. Please read the Welcome to
RotoProne statement and press the button to indicate you have read and complied with the statement.
The Welcome to RotoProne / New Patient screen will appear.
The following sections illustrate and describe the main screens and sub-screens to which they
provide access. The Help button is present on all screens and may be accessed at any time to
explain a screen's function or to navigate through various screens. The CPR button is located in the
lower right corner of all screens. Press to activate the CPR function at any time.
2-2
Power Switch