Arjohuntleigh RotoProne User Manual page 35

ALARM CONDITION
Control Error
NOTE:
For questions regarding this product, supplies,
maintenance or additional information about
ArjoHuntleigh products and service, please
contact ArjoHuntleigh or an ArjoHuntleigh
authorized representative.
In the US, call 1-800-343-0974.
WHAT IT MEANS
Software / electronics Caregivers should exercise
clinical judgement as to
error
patient ability to tolerate a
return to the supine position.
To begin corrective actions
initiate the following:
1. Press cancel button.
2. If control error screen
reappears, use the emergency
release handle to return
patient to 0° supine. Reengage
emergency release handle.
3. Push lock pin in. Home
screen will reappear.
4. Press and hold off button to
shut down unit. Information
screen will appear.
5. Press and hold Prepare unit
for transport button.
6. Pull lock pin to rotate unit.
7. Press and hold the Rotate
and Lower button.
8. Press and hold button to raise
patient surface to transport
height. Push lock pin in.
9. Disconnect power cord.
10. Plug power cord back in
and allow controls to reboot
following the on screen
instructions.
11. Call ArjoHuntleigh
immediately.
If patient is returned to supine
position and the error is unable
to be corrected, the patient can
be turned to the prone position
via the Manual Rotation
Feature. See page 2-19 for
detailed instructions.
2-23
CORRECTIVE ACTION