Arjohuntleigh RotoProne User Manual page 43

9. Press Done button. The software will boot and the
Notice To Users screen will appear.
10. Read through welcome information, then press
round button at bottom of screen. The Welcome To
RotoProne / New Patient? screen will appear.
11. Press Yes button. A confirmation screen will appear.
If the No button is selected, any previously saved
patient information and therapy settings will
be restored and the Main Menu screen will be
displayed.
12. Press Yes button. The Are You Sure screen will appear
and will ask if you want to clear the last patient's data.
Press the Yes or No button at bottom of screen.
13. Press Yes button. The Set Up Wizard screen will appear.
The Set Up Wizard guides the user through all screen displays necessary to place a new patient
and begin therapy.
Pressing Done button starts the collection of new patient data without using the Set-Up Wizard.
If Done button is pressed, the Home screen will appear, default settings will be used for therapy,
and the scale must be zeroed manually.
3-3