Arjohuntleigh RotoProne User Manual page 67

• Once checklist has been cleared, the Face Pack
Caution screen will appear and an alert beep will
sound.
• Manually pull up on face pack to ensure it is
attached securely.
5. Re-examine patient's placement in head support
assembly, paying particular attention to the position of
face pack. When head position is satisfactory, press
Confirm button. The Move To Prone screen will
appear.
Ensure all four proning pack buckles are fastened and straps are securely tightened
before proning patient. Patient may shift when rotated. Re-assess and tighten, as needed.
6. Use the hand control located at the head of the unit or button on main screen to move the patient
into prone position. Watch lines and tubes carefully to ensure they do not catch, tangle or become
twisted.
Hold button until the patient surface is at 0° prone.
The Checklist screen will reappear.
Be aware that the head support will shift
downward slightly to compensate for patient
compression into the prone packs.
If rotation is interrupted while the patient is
moving to the prone position, the Interrupted
Rotation screen will appear. Press the Continue
button to resume moving the patient surface
into the full 0° prone position.
Notice that the Interrupted Rotation screen also
provides fast or slow rotation options. Press the
corresponding button to change the speed at which
the patient surface moves into prone or supine
position. This will not change the speed at which the patient surface rotates during Kinetic Therapy.
3-27