Arjohuntleigh RotoProne User Manual page 49

23. Lower tube management system (for ease of access
while placing patient's head), if necessary:
• Loosen black knobs contralaterally, as shown at
right.
Tube management system may fall if knobs are
loosened too far. Support the system as knobs
are loosened.
• Carefully swing tube management system down.
24. Turn head support adjustment knob to open head
support and pull silver knob to tilt the head support to
the side to facilitate patient transfer. Head support will
not open completely.
25. Adjust head support alignment:
• Locate head support adjustment handle on
underside of patient surface, as shown at right.
• Turn handle so that adjustment shaft shows two
inches of clearance, as shown at right.
26. Remove any other accessories from patient surface.
Use silver knob to
tilt head support
2 in
3-9