Timing Chain Cover Cleaning And Inspection; 2Nd Timing Chain And Chain Tensioner Components - Suzuki Grand Vitara Service Manual

NOTE
Be sure to use the following bolts instead of
pins in order to fix crank pulley by special
tool.
Bolt size: M8, P1.25 L = 25 mm (0.98 in.)
Strength: 7T
Tightening torque
Crankshaft pulley bolt (a): 150 N·m (15.0 kgf-m,
108.5 lb-ft)
2. Bolt

2nd Timing Chain and Chain Tensioner Components

8
(a)
7
1. 2nd timing chain
: Apply engine oil
2. Timing chain tensioner adjuster No.2
: Apply engine oil to sliding surface.
3. Tensioner adjuster No.2 gasket
4. Intake camshaft timing sprocket
5. Exhaust camshaft timing sprocket
www.CarGarage.ir
I2RH01140060-01
3. Wrench
4
9
3
5
1
9
6 (b)
2
(c)
6. Camshaft timing sprocket bolt
7. Timing chain tensioner adjuster No.2 nut
8. Timing chain tensioner adjuster No.2 bolt
9. Pin
10. Oil relief valve
www.CarGarage.ir
Engine Mechanical: For J20 Engine 1D-87
11) Install engine assembly to vehicle referring to
"Engine Assembly Removal and Installation: For J20
Engine".

Timing Chain Cover Cleaning and Inspection

Clean
Clean sealing surface on timing chain cover, crank case,
cylinder block and cylinder head.
Remove oil, old sealant, and dust from sealing surface.
Inspection
Check oil seal lip for fault or other damage. Replace as
necessary.
10
S5JB0A1426022
S5JB0A1426023
I5JB0A142023-02
: 11 N⋅m (1.1 kgf-m, 8.0 lb-ft)
: 80 N⋅m (8.0 kgf-m, 58.0 lb-ft)
: 45 N⋅m (4.5 kgf-m, 32.5 lb-ft)
: Do not reuse.