Suzuki Grand Vitara Service Manual page 311

6) Apply engine oil to sliding surface of chain tensioner
(1) and install chain tensioner and spacer.
Tighten tensioner bolt to specified torque.
Tightening torque
Timing chain tensioner bolt (a): 25 N·m (2.5 kgf-
m, 18.0 lb-ft)
7) Check that match marks (1) on intake and exhaust
camshaft timing sprockets are in match with dark
blue plates (2) of timing chain and match mark (3) on
crankshaft timing sprocket is in match with gold plate
(4) of timing chain.
[A]
1
A
2
Approx.
60˚
[A]: View A
www.CarGarage.ir
I2RH0B140063-01
1
2
Approx.
30˚
3 4
I3RH0B140035-01
www.CarGarage.ir
Engine Mechanical: For M16A Engine with VVT 1D-25
8) Screw in plunger (1) by turning body (2) in arrow
direction and install a retainer (3) (wire) to hold
plunger in place.
9) Install timing chain tensioner adjuster assembly (1)
with a retainer (2).
Tighten adjuster bolts to specified torque and then
remove a retainer from chain tensioner adjuster
assembly.
Tightening torque
Timing chain tensioner adjuster bolt (a): 11 N·m
(1.1 kgf-m, 8.0 lb-ft)
I2RH0B140065-01
I2RH0B140066-01