Suzuki Grand Vitara Service Manual page 229

Terminal Wire
No. color
BLU/ Throttle actuator
E23-50
ORN control relay output
Ground for
BLU/ accelerator pedal
E23-51
YEL position (APP)
sensor (sub)
Accelerator pedal
BLU/
E23-52 position (APP)
GRN
sensor (sub) signal
Output for 5 V
power source of
ORN/
E23-53 accelerator pedal
BLU
position (APP)
sensor (sub)
Ground for
accelerator pedal
E23-54 ORN
position (APP)
sensor (main)
Accelerator pedal
WHT/ position (APP)
E23-55
BLU sensor (main)
signal
Output for 5 V
power source of
E23-56 WHT accelerator pedal
position (APP)
sensor (main)
E23-57 —
E23-58 —
E23-59 —
Main power supply
E23-60 BLU
relay output
www.CarGarage.ir
Circuit Normal voltage
0 – 1 V
Below 0.3 V
0.30 – 0.44 V
1.74 – 2.17 V
4.5 – 5.5 V
Below 0.3 V
0.65 – 0.82 V
3.50 – 4.27 V
4.5 – 5.5 V
— —
— —
— —
10 – 14 V
0 – 2 V
www.CarGarage.ir
Engine General Information and Diagnosis:
Condition
Ignition switch turned ON.
Ignition switch turned ON.
Ignition switch turned ON
and accelerator pedal at
idle position after warmed
up engine.
Ignition switch turned ON
and accelerator pedal at
full depressed position
after warmed up engine.
Ignition switch turned ON.
Ignition switch turned ON.
Ignition switch turned ON
and accelerator pedal at
idle position after warmed
up engine.
Ignition switch turned ON
and accelerator pedal at
full depressed position
after warmed up engine.
Ignition switch turned ON.
—
—
—
Ignition switch turned OFF.
Ignition switch turned ON.
1A-222
Remarks
—
—
—
—
—
—
—
—
—
—
—