To Install An Electric Gun; To Install A Hand-Operated Gun - Nordson 3000V Series Manual

A 1-10
Installation
A3EN-04-[3V-A-AAXP]-12

To Install an Electric Gun

Follow the instructions in the manual shipped with the gun to complete
the following procedures:
Mount the gun on the production line.
S
Install the gun driver.
S
Connect power to the driver.
S
Connect a triggering device to the driver.
S
Connect a hose to the gun.
S
Instructions for connecting the hose and gun cordsets are given later in
this section. Refer to Connecting Gun and Hose Cordsets.

To Install a Hand-Operated Gun

Follow the instructions in the manual shipped with the gun to connect the
hose to the hand-operated gun. One end of the hose is wired to the gun;
the other end connects to the unit. Instructions for connecting the hose
and gun cordsets are given later in this section. Refer to Connecting Gun
and Hose Cordsets.
41-3000V
Issued 5/00
E 2000 Nordson Corporation
All rights reserved