Summary Of Features To Customize - Nordson 3000V Series Manual

A 1-40
Installation
Programming System
Controls
(contd.)
Control Area
SYSTEM SETTINGS
TEMPERATURE
CLOCK
PATTERN
CONTROL
A3EN-04-[3V-A-AAXP]-12
Table A 1-11 Summary of Features to Customize
From SYSTEM SETTINGS you can customize the following features, which are explained
in more detail in Table A 1-12:
 Password Enable
 System-Ready Time Delay period
 Overtemperature Setpoint
 Celsius or Fahrenheit display
 Global Temperature Band setting
 Individual Temperature Bands setting
 Sequential or Simultaneous Startup
 Display Heater Proportioning
 Warning or Power notification
 Ready or Pump notification
 Auto-Energize Pump (piston pump units only)
 Auto-Energize Pump Temperature setting (piston pump units only)
 Auto-Energize Heaters
 Auto-Energize Pattern Control
 Time with Heaters On
SETPOINT Temperature: This feature sets the temperature that a zone will maintain
during normal operation.
STANDBY Temperature: This feature sets the desired temperature to which a zone will
be reduced when the system is in the standby mode.
SET TIME: This feature keeps the current day and time. The clock must be on before
you can use the HEATERS ON, HEATERS OFF, ENTER STANDBY, and EXIT STANDBY
features.
ENTER STANDBY and EXIT STANDBY: This feature sets the time that you want the
system to automatically enter and exit the standby mode.
HEATERS ON and HEATERS OFF: This feature sets the time that you want heaters to
automatically turn on and off.
OUTPUT 1: This feature allows you to control how output 1 applies a pattern.
OUTPUT 2: This feature allows you to control how output 2 applies a pattern.
LINE SPEED: This feature allows you to enter your line speed so the pattern controller
accurately applies pattern sets to your product.
STORE: This feature allows you to store as many as 99 pattern sets in the controller's
memory. Once a pattern set is stored, it can be used any time.
USE: This feature allows you to use a stored pattern set.
Features to Customize
41-3000V
Issued 5/00
E 2000 Nordson Corporation
All rights reserved