Page 1
380 Sieve Manual P/N 7156868A −English− Issued 11/10 This document is subject to change without notice. Check http://emanuals.nordson.com for the latest version. NORDSON CORPORATION • AMHERST, OHIO • USA...
Page 2
Prism, Pro-Meter, Pro-Stream, Process Sentry, PurTech, Pulse Spray, Saturn, Seal Sentry, Select Charge, Select Series, Sensomatic, Shaftshield, Spectral, Spectrum, Sure Brand, Sure Coat, Swirl Coat, Vista, Walcom, 2 Rings (Design) are trademarks − T − of Nordson Corporation. Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes, could lead to violation of the owners’...
......... 380 Sieve P/N 7156868A E 2010 Nordson Corporation All rights reserved Issued 10/10...
Page 4
Declaration of Conformity 380 Sieve E 2010 Nordson Corporation P/N 7156868A All rights reserved...
Page 5
Declaration of Conformity DECLARATION of CONFORMITY PRODUCT: 380 Sieve (Sieving Machine 380) PRODUCT RANGE: All variants and models Conformity has been verified following the provisions of the following directives: EC Council Directive on Machinery 2006/42/EG in the version 2006/95/EG STANDARDS USED TO VERIFY COMPLIANCE: EN ISO 12100−1, EN ISO 12100−2, EN ISO 14121−1, EN 60 204−1, EN 1127−1, EN 12981...
Page 6
Declaration of Conformity 380 Sieve E 2010 Nordson Corporation P/N 7156868A All rights reserved...
Page 7
Introduction Congratulations on the Purchase of Your Nordson Product Nordson equipment is engineered and manufactured in accordance with strict specifications, using high quality components and state-of-the-art technologies that assure reliable, long-term performance. Your product was thoroughly tested for proper operation prior to shipment.
Page 8
Introduction 380 Sieve E 2010 Nordson Corporation Part 768660B All rights reserved...
Page 9
41-61-411 3838 41-61-411 3818 United Hot Melt 44-1844-26 4500 44-1844-21 5358 Kingdom Finishing 44-161-495 4200 44-161-428 6716 Nordson UV 44-1753-558 000 44-1753-558 100 Distributors in Eastern & Southern Europe DED, Germany 49-211-92050 49-211-254 658 E 2010 Nordson Corporation All rights reserved...
Page 10
Introduction Outside Europe / Hors d’Europe / Fuera de Europa For your nearest Nordson office outside Europe, contact the Nordson offices below for detailed information. Pour toutes informations sur représentations de Nordson dans votre pays, veuillez contacter l’un de bureaux ci-dessous.
380 Sieve General Information Thank you for choosing a 380 Sieve. To ensure safe and proper operation of the product, please read this manual thoroughly before using the product for the first time! Please store this manual carefully. Package contents...
The following symbols must be observed at all times: DANGER: This symbol indicates the risk of personal injury. WARNING: This symbol indicates the risk of property and environmental damage. P/N 7156868A 380 Sieve E 2010 Nordson Corporation...
Nordson will not be liable for personal injury or property damage caused by unintended and/or improper handling of the equipment. Quality Control Your equipment has been carefully inspected, during and after production.
Never use high−pressure compressed air to remove dust or powder from skin or clothing. High−pressure compressed air can penetrate the skin and cause serious injury or death. P/N 7156868A 380 Sieve E 2010 Nordson Corporation...
High−pressure compressed air can penetrate the skin and cause serious injury or death. Do not smoke near the equipment. Comply with all company safety instructions as well as applicable accident prevention and safety regulations. 380 Sieve P/N 7156868A E 2010 Nordson Corporation...
If the ultrasonic settings are too high it can have the reverse effect and not sieve efficiently. Before beginning work, it is advisable to try out various settings and then check performance again after a while. 380 Sieve P/N 7156868A E 2010 Nordson Corporation...
This may sometimes require a vent assist. (P/N: 736484) 1. Vent connection Operation WARNING: Ultrasonic sieving, optional: Continuously purge the ultrasonic transducer with compressed air during operation. Otherwise there is a risk of overheating and component failure. P/N 7156868A 380 Sieve E 2010 Nordson Corporation...
WARNING: Ultrasonic sieving, optional: It is imperative when reassembling that the titanium thread on the ultrasonic transducer and the thread bore in the sieve frame are free of dirt. 380 Sieve P/N 7156868A E 2010 Nordson Corporation...
DANGER: Do not clean under running water − risk of death! Use only a rag dampened with a permitted cleaning agent. Solvents are not allowed! P/N 7156868A 380 Sieve E 2010 Nordson Corporation...
Spare parts and wearing parts that are not inspected with the system can lead to malfunctioning. Use only original parts from Nordson as replacements. WARNING: The installation of unapproved components as well as modifications and changes that have not been approved can compromise safety and limit the warranty.
Need help?
Do you have a question about the 380 and is the answer not in the manual?
Questions and answers