Installing Guns; To Install An Air-Operated Gun - Nordson 3000V Series Manual

Installing Guns

Fig. A 1-6 Air-Operated Gun (left), Electric Gun (center), and Hand-Operated Gun (right)
E 2000 Nordson Corporation
All rights reserved
This part of the installation section refers you to the correct installation
procedure for the type of gun you plan to install. Use Figure A 1-6 to
determine which type of gun you are installing, an air-operated gun, an
electric gun, or a hand-operated gun. Then refer to one of the following
procedures:

To Install an Air-Operated Gun

S
To Install an Electric Gun
S
To Install a Hand-Operated Gun
S
NOTE: Air-operated and electric guns are also referred to as
automatic guns.
To Install an Air-Operated Gun
Follow the instructions in the manual shipped with the gun to complete
these procedures:
Mount the gun on the production line.
S
Install the gun solenoid valve.
S
Connect air to the solenoid valve.
S
Connect a triggering device to the solenoid valve.
S
Connect a hose to the gun.
S
Instructions for connecting the hose and gun cordsets are given later in
this section. Refer to Connecting Gun and Hose Cordsets.
41-3000V
Issued 5/00
A 1-9
Installation
4130692
A3EN-04-[3V-A-AAXP]-12