Appendix B: Installing A Keyboard Mechanism For Bi-Level Worksurfaces - Steelcase 5 Series Manual

Appendix B: Installing a Keyboard
®
Mechanism for Bi-Level Worksurfaces
1
Prepare a large open space to assemble the table.
• Sweep the floor! Screws and small parts can damage
the worksurface.
• Put down a CLEAN shipping blanket to protect the worksurface.
2
Unpack the worksurface and place on the shipping blanket upside-down.
• REMEMBER - You're looking at the UNDERSIDE of the worksurface.
Are you sure which side is left or right?
3
With the assembly inverted, arrange the "keyboard"
portion of the worksurface face-down as shown.
Be sure to place the user-edge toward the end user's
position as shown.
3
KEYBOARD PORTION
OF WORKSURFACE
1
2
1-1/2" GAP
Page 29 of 35
004231D Rev T