Connect And Route All Cables - Steelcase 5 Series Manual

®
1
Connect switch to primary motor using the
supplied RJ-11 cable.
NOTE: To manage switch cable, and to prevent
damage to the connection point on the motor,
use the supplied cable clips as shown.
Primary Motor
2
Connect primary motor to secondary
motor using the supplied
motor-to-motor cable.
2

Connect and Route All Cables

Switch
1
3
Connect power supply to primary motor with the cable
already attached to the power supply.
4
Connect power cord to power supply.
4
5
Route all cables through wire managers.
Keep all cables clear of moving parts!
3
CAUTION: Be sure to create a 'drip loop' in the
power cord before making the connection to a
live wall socket, to prevent electric shock if
liquids spill on power cord.
NOTE: For best results, route
all cables carefully and neatly.
Page 25 of 35
004231D Rev T