®
2
o
For
120
tables, mount the center leg bracket as
shown such that the set screws face the floor. Add
decorative cover after tightening the two (2) M6 nuts.
M6 NUTS
3
For all other stretchers, mount the ends to the legs using two (2) nuts
per connection. Place decorative covers over each end after assembly.
Straight:
M6 NUTS
Installing Stretchers (cont.)
SET SCREWS TO
FACE THE FLOOR.
2
3
4
Gently tighten all set screws between stretcher tubes.
90º:
M6 NUTS
4
Page 24 of 35
004231D Rev T