Installing Switch & Power Supply - Steelcase 5 Series Manual

Installing Switch & Power Supply
®
NOTE: Mount the power supply in a way that
assures accessories can be clamped to the
worksurface, and allow all cables to reach.
1
120º:
1
Mount and install the power supply with two (2) of the
#10 x 1.075 long screws provided.
POWER SUPPLY
90º:
POWER SUPPLY
Straight:
2
Attach the switch at the front of the worksurface, adjacent to
the leg with the master motor. Use the pre-drilled pilot holes for
proper switch position, and affix the two (2)
POWER SUPPLY
#8-15 x 5/8" screws.
PRIMARY MOTOR
SWITCH
Page 21 of 35
004231D Rev T