®
1
Ensure all decorative trim caps are securely
attached.
Double-check that all nuts, bolts, screws and
compression nuts are securely attached.
HOLE CAPS
2
Flip each completed table right-side up and test the
function of each completed table. Cycle the table
all the way up and down to test for correct
function.
Finishing the Table Assembly
STRETCHER CAPS
1
ASSEMBLY DIRECTION
AND USER GUIDE
PLEASE LEAVE THESE INSTRUCTIONS, AND
THE USER GUIDE, IN AN OBVIOUS PLACE
3
FOR THE END USER AFTER ASSEMBLY.
4
Finally, adjust glides to level the table, both
left to right and front to back.
4
4
Page 26 of 35
004231D Rev T