Installing The Desk; Assembling The Desk; Height Compensation - Steelcase Migration Bench User Manual

Installation and assembly

Installing the desk

Installation and use of the product requires detailed planning. For this purpose, Steelcase offers its own
planning department.
The partially assembled components of the Migration desk are usually delivered by specialist dealers or directly
from the manufacturer.
The installation location must meet the following requirements:

Sufficient carrying capacity of the floor.

Horizontal storage surface.

Temperature range +5 °C to +40 °C.

Max. rel. humidity: 80 %

Assembling the desk

Steelcase recommends assembly by a specialist dealer or an assembly company.

Height compensation

To compensate for uneven ground, you can raise each foot by up to 1.0 cm with an adjusting screw.
For a desk that has already been assembled: before levelling, remove any objects from the desktop.
Fig. 4 Migration height compensation / Migration
Bench height compensation
1 Adjusting screw
 Turn the adjusting screw until height compensation is complete.
Migration Manual -en- 2018
Fig. 5 Migration height compensation / Migration
Bench height compensation
1 Adjusting screw
Page 17 of 35