Identify The Primary And Secondary Motors - Steelcase 5 Series Manual

®
The primary motor and secondary motor look the same,
except for the connection panel at the back.
NOTE: The power supply converts 120V AC
from the wall outlet to 24V DC. The series 5
motors operate on 24V DC.
IMPORTANT! The master motor has one other key difference.
It also has a hidden kill switch. This kill switch is inside the
front mounting hole. If the front mounting bolt is not properly
installed, the table will not operate!
FRONT MOUNTING HOLE

Identify the Primary and Secondary Motors

KILL SWITCH
Secondary
Primary
CORRECT!
(Table will not operate)
MOUNTING
BOLT
Rear View
Primary Secondary
4-WIRE CONNECTOR
TO SECONDARY MOTOR
RJ-11 SOCKET
FROM SWITCH
2-WIRE CONNECTOR
FROM POWER SUPPLY
WRONG!
NO MOUNTING
BOLT
004231D Rev T
SINGLE 4-WIRE
CONNECTOR FROM
PRIMARY MOTOR
Page 15 of 35