90 O Corner Tables - Steelcase 5 Series Manual

o
90 Corner Tables
®
o
90 corner tables are available either as right-hand or left-hand tables.
In order to go from right-hand to left-hand configurations, three (3) items must be changed:
1) Orientation of center leg
2) Placement of stretchers
3) Configuration of intermediate gearbox (See page 10)
The gearboxes ship from the factory set up for right-hand tables.
Orientation of the center leg and placement of stretchers are controlled by the installer.
10" and 21" corner legs are marked with "A" and "B" labels.
The correct letter must be visible per the diagram.
Otherwise, the center leg would go UP when the other legs would go DOWN, and vice-versa.
Equal-Sized and Right-Hand Tables (Factory Default)
NOTE: Equal-Sized 90
SHORT SIDE
ON LEFT
SECONDARY MOTOR
o
and Equal-Sized 120
"A" FACES IN
CENTER LEG
SPECIAL STRETCHER
o
Corner Tables are designed as right-hand tables by default.
INTERMEDIATE
GEARBOX
LONG SIDE
ON RIGHT
SWITCH
PRIMARY MOTOR
Page 12 of 35
004231D Rev T