Through - Steelcase 5 Series Manual

®
7
Reinstall motor.
8
Ensure all driveshafts are inserted into driveshaft tubes.
Tighten set screws very tightly with 3mm hex wrench.
Installing Driveshafts (cont.)
7
8
9
Tighten the motor mounting nuts.
9
MOUNTING SCREWS 10
10
The alignment of the (2) inner hexagonal driveshafts and the
(1) outer driveshaft / collar needs to be as straight as possible.
It may be necessary to:
1) Loosen the leg mounting screws.
2) Adjust the legs to obtain optimal driveshaft alignment.
3) Tighten the leg mounting screws.
Page 20 of 35
004231D Rev T