To display the time of the system, use the time command.
This command has no other arguments or keywords.
Does not change configuration
User password protected
The time is displayed in the same format as this example:
Fri Aug 24 10:50:31 2001 PST
PST is the time zone. See
The following example shows how to display the time of the system.
edfa > time
Thu Dec 13 19:29:02 2001 GMT
78-14134-01, Release 1.0
This command was introduced.
Appendix C, "Time Zone Codes,"
Sets the time of the system.
Displays or modifies the timezone of the system.
for a list of time zones and correlating
Cisco ONS 15501 User Guide