Set-User-Pwd - Cisco ONS 15501 User Manual

Chapter 4 Command Reference

set-user-pwd

To modify the user password for the system, use the set-user-pwd command.
Syntax Description
This command has no other arguments or keywords.
Defaults None
Command Types
Changes configuration
Command Modes
Master password protected
Command History Release
EDFA 1.0
Usage Guidelines This command prompts the user for the old password, and then prompts twice for the new password. The
new password entered for both prompts must match. The default user password is edfa.
Examples The following example shows how to set the time of the system.
edfa > set-user-pwd
Old User Password:
New Password:
New Password:
Related Commands Command
set-master-pwd
78-14134-01, Release 1.0
set-user-pwd
Modification
This command was introduced.
Description
Sets a new master password for the system.
set-user-pwd
Cisco ONS 15501 User Guide
4-47