Get-Snmp-Mgr - Cisco ONS 15501 User Manual

Chapter 4 Command Reference

get-snmp-mgr

To display the SNMP (Simple Network Management Protocol) manager entries on the system, use the
get-snmp-mgr command.
Syntax Description
manager-ip
Defaults Displays all IP values of the SNMP manager
Command Types Does not change configuration
Command Modes
User password protected
Command History Release
EDFA 1.0
Usage Guidelines
Use this command to display SNMP manager configuration information for a single entry or for all
entries on the system.
Examples The following example shows how to display the IP values, community strings and gateways for a given
IP entry.
edfa > get-snmp-mgr 10.1.2.71
A list of the SNMP manager IP addresses
===========================================
209.128.68.147
10.1.2.71
Related Commands Command
add-snmp-mgr
del-snmp-mgr
78-14134-01, Release 1.0
get-snmp-mgr [manager-ip]
Modification
This command was introduced.
Description
Adds or modifies an SNMP manager entry.
Deletes an SNMP manager entry.
Specifies the IP address of the host running the SNMP manager.
get-snmp-mgr
Cisco ONS 15501 User Guide
4-13