To display the measured optical signal gain, use the gain command.
This command has no other arguments or keywords.
Does not change configuration
User password protected
The value for measured optical signal gain is displayed in dB.
The following example shows how to display the measured optical signal gain.
edfa > gain
78-14134-01, Release 1.0
This command was introduced.
Displays the configured signal gain and alarm mean level.
Displays the gain alarm trigger level.
Resets the signal gain and alarm mean level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, internal case temperature
alarm mean level, and internal case temperature alarm trigger level to the
manufacturer's default settings.
Sets the signal gain and alarm mean level.
Sets the gain alarm trigger level.
Cisco ONS 15501 User Guide