Optoutpwr - Cisco ONS 15501 User Manual

optoutpwr

optoutpwr
To display the optical output power, use the optoutpwr command.
Syntax Description
This command has no other arguments or keywords.
Defaults None
Command Types
Does not change configuration
Command Modes
User password protected
Command History Release
EDFA 1.0
Usage Guidelines The value for optical output power is displayed in dBm.
Examples The following example shows how to display the optical output power .
edfa > optoutpwr
-28.53 (dBm)
Cisco ONS 15501 User Guide
4-24
optoutpwr
Modification
This command was introduced.
Chapter 4 Command Reference
78-14134-01, Release 1.0