Command Reference - Cisco ONS 15501 User Manual

Command Reference

This chapter describes the commands used in the Cisco ONS 15501 environment. The commands are
listed alphabetically.
To display a list of available commands, enter help. To obtain the syntax for any individual command,
Note
enter help [command].
All commands are case insensitive.
Note
Commands that change the configuration of the control module are protected by the master password.
Note
Commands that allow access to information but do not change the configuration are protected by the
user password.
78-14134-01, Release 1.0
C H A P T E R
Cisco ONS 15501 User Guide
4
4-1