Gaintrig - Cisco ONS 15501 User Manual

Chapter 4 Command Reference

gaintrig

To display the gain alarm trigger level, use the gaintrig command.
Syntax Description
This command has no other arguments or keywords.
Defaults None
Command Types
Does not change configuration
Command Modes
User password protected
Command History Release
EDFA 1.0
Usage Guidelines The value for Cisco ONS 15501 gain alarm trigger level is displayed in dB.
Examples The following example shows how to display the gain alarm trigger level.
edfa > gaintrig
1.00 (dB)
Related Commands Command
gain
gainmean
resetmeantrig
setgainmean
setgaintrig
78-14134-01, Release 1.0
gaintrig
Modification
This command was introduced.
Description
Displays the measured optical signal gain.
Displays the configured signal gain and alarm mean level.
Resets the signal gain and alarm mean level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, internal case temperature
alarm mean level, and internal case temperature alarm trigger level to the
manufacturer's default settings.
Sets the signal gain and alarm mean level.
Sets the gain alarm trigger level.
gaintrig
Cisco ONS 15501 User Guide
4-11