Temptrig - Cisco ONS 15501 User Manual

temptrig

temptrig
To display the internal case temperature alarm trigger level, use the temptrig command.
Syntax Description
This command has no other arguments or keywords.
Defaults None
Command Types
Does not change configuration
Command Modes
User password protected
Command History Release
EDFA 1.0
Examples The following example shows how to display the internal case temperature alarm trigger level.
edfa > temptrig
29.00 (C)
Related Commands Command
resetmeantrig
settempmean
settemptrig
temp
tempmean
Cisco ONS 15501 User Guide
4-54
temptrig
Modification
This command was introduced.
Description
Resets the signal gain and alarm mean level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, internal case temperature
alarm mean level, and internal case temperature alarm trigger level to the
manufacturer's default settings.
Sets the internal case temperature alarm mean level.
Sets the internal case temperature alarm trigger level.
Displays the internal case temperature level.
Displays the internal case temperature alarm mean level.
Chapter 4 Command Reference
78-14134-01, Release 1.0