Emergency Call - NEC DT830 Series User Manual

EMERGENCY CALL

You can make a call to a predetermined emergency
telephone number while the telephone is locked (in
Security mode). This function is available on the
telephone with Security key.
Note:
You can make an emergency call to only the pre-
determined number. For details on the setting of
the emergency number, contact the system
administrator.
Note: When using Emergency Call, you can use the
feature of the terminal in collaboration with a
mobile phone until the terminal is placed in Secu-
rity mode.
STEP 1: Lift the handset while the telephone is locked
(the screen saver is activated).
Dial Emergency Number Only
Note:
Emergency Call cannot be made with Speaker
key.
Note:
When pressing Unlock soft key, the telephone
prompts for the Security mode cancellation pass-
word.
STEP 2: Dial an emergency telephone number by
pressing digit keys(0-9, *, #).
DT830
Unlock
Note:
Emergency telephone number needs to be set in
advance. For the setting of the emergency tele-
phone numbers, contact the system administra-
tor.
Note: You can make a call to only the predetermined
number. When telephone numbers other than the
predetermined emergency number are dialed,
the following message appears (after a few sec-
onds, the display goes back to "Dial Emergency
Number Only" screen).
Invalid Dial.
STEP 3: After a conversation, replace the handset.
The LCD turns to time display.
STEP 4: (Security mode is released.)
Note:
If Security Lock is not set after originating an
Emergency Call, Security Lock will be set after 60
minutes from releasing Security Mode.
122
911