NEC DT830 Series User Manual page 86

• TO BACKUP PERSONAL SETTINGS
DT830 Series user can backup personal settings of DT
Series to FTP/TFTP server. To back up the setting data,
the DT Series needs to be connected to the network
that has FTP (TFTP server).
Note: For details on the FTP/TFTP service, contact the
System Administrator.
Before starting the backup, an IP Address of the FTP/
TFTP Server must be entered from DT Series.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Confirm the designated directory (for Win-
dows IIS, the default is "C:\InetPub\ftproot)
for the backed up file.
<TFTP server>
Specify a desired destination directory for the
backed up file.
STEP 2: Display the Menu screen, and select Setting.
3
STEP 3: Select Data Backup/Restore.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
3
• Press key.
, and then press ,
78
[Setting]
1
User Setting
2 Download
3 Data Backup/Restore
4
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
4
• Press key.
[Backup/Restore]
1
Data Backup
2 Data Restore
3
Server Address
4
Protocol
5
FTP Settings

STEP 5: Select a protocol used by the destination
server.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
1 2
• Press or
key.
Menu OK
, and then press
Back OK
, and then press
key, and then press or OK soft
,