Dial Intercom - NEC DT830 Series User Manual

DIAL INTERCOM

To Initiate
STEP 1: Lift handset or press the
STEP 2: Press DICM key.
STEP 3: Dial desired intercom station number. Re-
ceive ringback tone.
ICM
1:25 PM
To Answer
STEP 1: DICM LED flashes, indicating an incoming in-
tercom call.
STEP 2: Press DICM.
STEP 3: Lift handset or press
solid green.
STEP 4: If called station is engaged in a non-intercom
call, the station may press DICM after placing
the original call on hold (with
ICM
1:25 PM
DT830 DT430/410
Speaker
key.
Called party
2
MON 22 SEP 2014
Speaker
key. LCD shows
HOLD
Calling party
2
MON 22 SEP 2014
To Bridge Into A Dial Intercom Call
Note:
STEP 1: Press the DICM key, lift handset or press
STEP 2: A three-party conference is established.
Note:
key.)
138
Bridging is an optional feature.
Speaker
key.
Overriding party
OVERRIDE
1:25 PM MON 22 SEP 2014
CONF
1:25 PM MON 22 SEP 2014
Dial intercom provides a Dial Intercom group
where each member of the group may be called
by a 1-digit or 2-digit number without using their
prime lines.
3