NEC DT830 Series User Manual page 194

STEP 18:The display goes back to the Edit screen.
Check the memory number assigned to the
directory data being edited.
[Edit]
1
Ken Kobus
Gr
2 Colleagues
3
31300
4
Tel #2
5
Tel #3
6 Tel #4
NEC
7
Automatic
8
Automatic
9
No
0
0
Save
Note: A memory number is automatically set in ascend-
ing numeric order.
STEP 19:If you need to assign a memory number man-
ually, select
the previous step, and then enter a desired
memory number (0 - 499).
Enter a memory number by using digits keys.
After entering the memory number, press
or OK soft key.
Back
OK
0
Memory ID on the screen of
[Memory ID]
Input a memory number.
0-499
BK
STEP 20:When the display goes back to the Edit
screen, press Save soft key to save the as-
signed data.
STEP 21:"The data is registered at memory number:
XX" is displayed. Press
key. The display returns to the Directory
screen.
Note: If Name is not entered, "No Input Name" will
appear. Name information is required for a entry.
Note: If a duplicate Memory ID is entered, "It will over-
write a data at memory number:XX" will appear. If
you do not overwrite the Memory ID, press Back
soft key. If you overwrite the Memory ID, press
or OK soft key.
186
1
Back OK
key or OK soft