Call Back; To Save And Repeat A Number - NEC DT830 Series User Manual

CALL BACK

DT830 DT430/410
If Called Station is Busy
STEP 1: Press CALL BACK. Receive service set tone.
CALLBACK SET
1:25 PM
– Or –
STEP 1: Press the Flash key and enter "Call Back" ac-
cess code.
STEP 2: When both parties become idle, calling par-
ty's phone rings. Calling party would go off
hook and hear ring back tone.
The called station would then be ringing.
CALLBACK
1:25 PM
STEP 3: Connection is established when the called
party answers.
CALLBACK
1:25 PM
Called party
2000
MON 22 SEP 2014
Called party
2000
MON 22 SEP 2014
Called party
2001
MON 22 SEP 2014
Note: Call Back may be programmed by the Telephony
Server Admin. on a Programmable feature key or
by the user on a One-Touch Speed Calling key.
Using Soft Key
STEP 1: Press CallBack soft key and receive service
set tone.
STEP 2: "CALLBACK SET" is displayed and the Call-
Back soft key flashes on the display.
CALLBACK SET
1:25 PM
Mic

TO SAVE AND REPEAT A NUMBER

DT830 DT430/410
To Save
Speaker
STEP 1: Press
STEP 2: Dial desired telephone number.
STEP 3: Press Save&Rep. Dialed number is now
stored. Save&Rep LED lights.
– Or –
STEP 3: Receive internal call.
STEP 4: Press Save&Rep. Number is stored in mem-
ory.
153
MON 22 SEP 2014
>>>
key.