Security Mode - NEC DT830 Series User Manual

SECURITY MODE

By pressing the Security key, you can prevent
information leakage from terminal. While the terminal is
locked, Security Lamp lights up.
Note: Security key must be programmed in advance.
For the programming of Security key, contact the
system administrator.
Note: For using the feature of the terminal in collabora-
tion with a mobile phone, the terminal cannot be
placed in Security mode pressing Security key.
For details, contact the system administrator.
Security lock will be released.
Please input a password.
BK
Note: When the system administrator invalidates
the security mode, this function cannot be
used. For details of the security mode, con-
tact the system administrator.
DT830
Cancel OK
Note:
While the telephone is locked,
becomes disabled. Also, any features provided
by the telephony server, such as call origination
or call answering, cannot be performed.(The
Incoming call cannot be picked up though "Ring-
ing" or "Voice call" are possible.) It is necessary
to release the security mode to respond.
Note: To make a call of VOICE CALL is available
toward a called party in the Security mode. When
a called party activates the Security mode with
leaving its Mic to ON, the called party can con-
verse with a calling party though terminal opera-
tion is restricted.
Note: Even when the telephone is reset for any
reason (such as power-off, etc.) while the
telephone is placed in security mode, the
lock is not released.
• To Lock the Telephone
Before placing DT830 Series in Security mode, you can
set a password. For details on the password setting,
see TO CHANGE PASSWORD
Setup.
STEP 1: Press Security key. The following message
is displayed on LCD.
120
in chapter 3 Terminal
Security Lock?
Cancel OK
key
Menu