Logged Out Ip Station - Call Destination - NEC DT830 Series User Manual

Using Soft Key
STEP 1: Press CF-NoAns soft key. Receive special
dial tone.
STEP 2: Dial destination; wait for service set tone.
STEP 3: "FORWARD SET" is displayed; Call Forward-
ing – Don't Answer is set.
FORWARD SET
1:25 PM
Mic
To Verify (Only For Terminal With LCD)
STEP 1: If verifying for another station, press MULTI-
LINE APPEARANCE while idle.
STEP 2: Press FWD-NA.
STEP 3: Display indicates the station number calls are
forwarded to.
FORWARD
1:25 PM
Note: Call Forwarding for Busy Line and Don't Answer
may be combined depending upon system pro-
gramming.
Note: With soft key operation, CF-Busy flashes on the
display.
MON 22 SEP 2014
>>>
Forwarding
station
2000
MON 22 SEP 2014
To Cancel
Speaker
STEP 1: Press
celing for another station, press MULTILINE
APPEARANCE.
STEP 2: Press FWD-NA or dial "Call Forwarding -
Don't Answer" cancel code. Receive service
set tone. LED goes out at your station (or the
DT Series of the multiline station).
Speaker
STEP 3: Press
Answer is cancelled.
FORWARD CANCEL
1:25 PM
LOGGED OUT IP STATION - CALL
DESTINATION
To Set
STEP 1: Lift handset or press
STEP 2: Press the CFLogout Key or dial "Logged Out
IP Station – Call Destination" access code.
STEP 3: Dial destination station number; receive ser-
vice set tone.
STEP 4: Replace handset or press
Logged Out IP Station – Call Destination is
set.
151
key. Receive dial tone. If can-
key. Call Forwarding – Don't
MON 22 SEP 2014
DT830
Speaker key.
Speaker
key.